-
-
     



Name:

Email Address:

Phone:

Message:



 


Toll Free: (800) 241-0681
Phone: (770) 345-6334
Fax: (800) 642-2904
















 

Plex-A-Bond
 

The affordable alternative to epoxy floor systems. For industrial, commercial and residential use.

Acrylic Additive used with cement products and jobsite installations ensures positive bonding. A concentrate liquid binder (no powders) to be used as a bonding agent, leveling coat and curing compound.

Polymer modified cement builds strength into cement based mixes. The proper cement/polymer ratio can increase compressive and flexural strength as much as 33% to 42%.

Plex-A-Bond is a water dispersion of an acrylic polymer specifically designed for modifying portland cement compositions.

The Plex-A-Bond terrazzo system is sanitary, flame proof and has an installed cost that is 25% less than similar epoxy floors.

All terrazzo colors and design figures can be provided in a 3/8" thick monolithic system that bonds itself to the concrete substrate.

The Plex-A-Bond system gives a finished floor in less time with no fumes or odor. Ease of maintenance and durability give a quality floor at an affordable price.

Installation is provided by recognized terrazzo contractors. Plex-A-Bond thin-set terrazzo conforms to the National Terrazzo and Mosaic Association (NTMA) specifications.

As a bond coat: Each gallon of Plex-A-Bond mixes with two gallons of water to form three gallons of bonding liquid which will cover 1,000 to 1,500 sq. ft., depending on the texture of the concrete substrate.

As a leveling coat: One gallon of Plex-A-Bond will mix with two gallons of water to wet sufficient sand and cement to top 90 sq. ft. at 1/4" thickness.

For grouting: One gallon of Plex-A-Bond will mix with two gallons of water to combine with pure cement for grouting 2,000 sq. ft. or more.

As a concrete waterproofing or curing compound: Same as for use as a bond coat.

As a wetting agent for terrazzo: See specification guide for polyacrylate terrazzo.

Check the many types of installation where Plex-A-Bond can provide a more durable product: Brick masonry, Stucco, Tile on underbed, Add to thinset mortar, Thin toppings to concrete, Additive for grouting, Pre-cast concrete and tiles, Admix for Portland Cement Terrazzo!

 

 Copyright 2008 Klein and Company, Inc.   |   Site Designed by: Elasticdesigns - An Atlanta Web Design Company